Repair guide : LCD Screen iPhone 6S Plus
Author : Alexandre
855 people accept washed this repair successfully !
Why non yous?
You wish to practice the fixing yourself of your
iPhone 6S Plus broken screen
? Nothing improve than having a like new iPhone after defective pixels.
The SOSav team volition assist you throughout all the step for this
where pictures will aid y’all replace the LCD screen of your iPhone 6S Plus. By doing if yourself, you salve upwardly to 3 times the price you’d pay in a repairing shop !
cleaved, cracked LCD screen>
black or white screen
Some advice before you lot start
Before disassembling the LCD screen of your iPhone 6S Plus, you accept to securely turn information technology off.
Maintain the power button on the top for a few seconds.
Then slide to the right to “power off” button in red.
Your iPhone 6S Plus is now turned off.
The iPhone 6S Plus SIM card tray is on the right side of the phone, nigh the power button (on/off/sleep)
With a pentalobe screw driver, remove the two screws circled in red on the motion picture.
Those screws are on both side of the lightning connector of the phone.
Those two screws maintain the bottom role of the screen on the iPhone’s frame.
And then put the iSclackon the iPhone 6S Plus.
The suction cups take to be nearly the home button (at the lesser) as shown on pictures 1 and ii.
Make sure the suction cups are perfectly attached to the iPhone and then close the handle of the iSclack to carve up the suction cups, pulling the front end console upward from the rear case.
A black seal on both sides of the telephone and another white one at the top and bottom hold the brandish assembly to the rear panel.
Then elevator the brandish associates to a 90° bending.
With a cruciform screwdriver, remove the five screws circled in cerise.
Those screws hold the display assembly connector bracket. You’ll exist able to remove it using tweezers in the next step.
Use tweezers to remove the brandish assembly connector bracket.
With a nylon spudger, gently pry to disconnect the post-obit cables:
- Front camera
- Earpiece speaker
- Proximity and light sensor
- Touch screen/LCD screen
Still using the nylon spudger, gently pry to disconnect the last cable property the display associates to your iPhone 6S, running :
– The front photographic camera
– The earpiece speaker
– The light and proximity sensor
-The home push.
You can lift the brandish assembly and remove it.
The display assembly of the iPhone 6S Plus is now disassembled.
Use a cruciform screwdriver and remove the iii screws circled in reddish.
Those screws maintain the earpiece speaker bracket.
With tweezers, you can remove the earpiece speaker bracket.
With the nylon spudger, remove the front photographic camera front its socket.
Take hold of the earpiece speaker and remove it with tweezers.
The earpiece speaker of your iPhone 6S Plus is now disassembled.
Use the nylon spudger to skin off the lite and proximity sensor.
Then remove the cable.
The proximity/light sensor cable of your iPhone 6S Plus is now disassembled.
Use the cruciform screwdriver and remove the four screws circled in red (picture 1) also as the three screws circled in red (movie ii) holding the LCD shield plate.
Still with the same screwdriver, remove the 2 screws circled in red holding the home push bracket.
Use a pair of tweezers to catch and remove the home button bracket.
Use a nylon spudger to pry and unclip the LCD shield plate.
The LCD shield plate of your iPhone 6S Plus is at present disassembled.
With a nylon spudger, disconnect the home button cable.
So peel off the home button cable with a spudger.
Careful, the home button cablevision is very fragile, you have to be meticulous.
Brand sure your put back the original Touch ID, otherwise for rubber reasons, the Touch ID will non work once again.
Use the spudger’s tip to take off the home push.
Grab the home button and remove it with tweezers.
The LCD screen of your iPhone 6S Plus is now disassembled.
You lot can replace your cleaved LCD screen past a new one.